This is 3/8“ Starphire glass with polished nickel hardware. There is an operable transom panel above the door. The fixed panels were recessed into the stone for a very clean installation.
We used 3/4“ Starphire glass on this project. We mounted a recessed U-channel in the ceiling. It appears that the glass is floating. The large panel weighed over 500lbs. Truly an amazing shower.
This is 1/2“ Starphire glass with a surface mounted u-channel at the top.
This is 3/8“ clear tempered glass with polished chrome hardware. We used two 2x2 clips to hold the fixed panel.
This shower is made with 3/8” Starphire glass. We used special wall mounted clips that enabled us to hinge the door off of the glass panel. We love the clean/simple look of this shower.
This is another example 3/8“ Starphire tempered glass. We used 2x2 clips at the top to hold the glass in place.
We used 3/8“ Starphire glass along with polished chrome hardware.
This shower is made with 3/8” clear glass. 2x2 clip at the wall and the glass is silicone to the tile.
All of the glass in this shower is 1/2” Starphire tempered. The fixed glass was recessed into the ceiling.
We used a combination of 1/2” clear tempered and 1/2” satin etch glass; the etched glass created more privacy for the water closet area.
We used 3/8“ clear tempered glass with polished chrome hardware. The fixed glass panel is held in place with a U-channel at the wall. The door pull is a 8” ladder pull.