We used 1/4“ Starphire mirror, the edges are flat polished. There are three lights that are installed behind the mirror, and we sandblasted a 3” wide stripe in the mirror for the lights to shine through.
We used 1/4“ clear mirror. Most edges are flat polished. There are 23 pc’s of mirror that make up this area with 2 recessed doors.
This application is a fairly common installation using 1/4“ clear mirror with flat polished edges. The mirror is set on the backsplash and goes to the ceiling with holes drilled for the lights.
We used 1/4“ clear mirror that we installed into our customers wood frames. There are tracks on the top and bottom that allow the mirror to slide back and forth.
We applied 1/4“ clear mirror with flat polished edges to a recessed door that opens to make a medicine cabinet.
We used 1/4“ clear mirror with flat polished edges and applied them to a wood substrate that has cables attached to the wood, giving this this vanity a very unique look.
This clear mirror is 1/4“ with flat polished edges. Notches were added to the mirror for the ballet bar brackets. The end result is the best possible reflection for the client.
This large mirror is the biggest we have ever done. It measures 87“ x 130” with two outlets. It took four guys to set.