POLYCARBONATE “h” STRIKE
JAMB
This clear Polycarbonate “h” Strike
Jamb is an excellent choice to seal between the door and the fixed
panel on a 180° in-line application. Attach to the fixed panel
on the strike side. Note: for best results, use 5° positive closure
hinges to maintain constant pressure against the jamb. Secure jamb
with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
PHJ-38 |
1/2" |
PHJ-12 |
|
 |
180° POLYCARBONATE STRIKE JAMB
Snap this clear Polycarbonate 180° Strike
Jamb onto the fixed panel for an excellent seal on a 180° glass-to-glass
application. Note: for best results, use 5° positive closure hinges
to maintain constant pressure against the jamb. Secure jamb with Crystal
Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
P180SJ-38 |
1/2" |
P180SJ-12 |
|
 |
POLYCARBONATE “L” ANGLE
JAMB
Use this clear Polycarbonate “L” Angle
as a strike or as a jamb to seal between the door and the fixed panel
or wall. Note: for best results, use 5° positive closure hinges
to maintain constant pressure when being used as a strike. Attach with
Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
1/4" - 1/2" |
PLA-12 |
|
 |
135° POLYCARBONATE STRIKE JAMB
Designed to seal between the door and the
fixed panel on a 135° neo-angle enclosure. Attach to the mitered
fixed panel on the strike side. Note: for best results, use 5° positive
closure hinges to maintain constant pressure against the jamb. Secure
jamb with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
P135SJ-38 |
|
 |
135° POLYCARBONATE DOOR JAMB
Use this clear Polycarbonate to seal between
the door and the fixed panel on a 135° neo-angle enclosure. Attach
to the door on the hinge side. Note: for best results, secure jamb
with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
P135DJ-38 |
|
 |
90° POLYCARBONATE STRIKE JAMB
This clear Polycarbonate was designed to seal
between the door and the fixed panel on a 90° enclosure. Attach
to the fixed panel on the strike side. Note: for best results, use
5° positive closure hinges to maintain constant pressure against
the jamb. Secure jamb with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
P90SJ-38 |
|
 |
POLYCARBONATE BOTTOM RAIL WITH WIPE
Snap this Clear Polycarbonate Bottom Wipe
onto the bottom of the door to create a tight seal. May also be used
on top of the door for a seal in a steam enclosure. Note: for best
results, secure with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
PBR-38 |
1/2" |
PBR-12 |
|
 |
DRIP RAIL WITH DUAL WIPE (Dual Durometer)
Use this Clear Bottom Wipe with Drip Rail
on the bottom of the door to create a tight seal. The Angled Drip Rail
directs water back into the shower. Note: for best results, secure
with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
PDR-38 |
1/2" |
PDR-12 |
|
 |
SEAL AND WIPE (Dual Durometer)
Use this clear PVC Seal and Wipe between the
door and the wall on the hinge side or on the bottom of the door as
a wipe. Note: for best results, secure with Crystal Clear 2-way tape.
Glass Thickness |
Product Code |
3/8" |
PSW-38 |
1/2" |
PSW-12 |
|
 |
“H” WIPE (Dual Durometer)
This multi-purpose clear “H” Wipe
can be used in numerous applications; as a bottom sweep, a top seal
on the door in a steam enclosure, or as a vertical seal on the door
or fixed panel. Note: for best results, secure with Crystal Clear 2-way
tape.
Glass Thickness |
Product Code |
3/8" |
HW-38 |
1/2" |
HW-12 |
|
 |
“V” SEAL (Dual Durometer)
Use this clear “V” Seal between
the door and the wall on the hinge side or on the strike side of out-swing
doors only. Attach the rigid side to glass or wall. The soft leg provides
a cushioned, quiet closure. To attach, use Crystal Clear 2-way tape
for a positive, long lasting bond.
Glass Thickness |
Product Code |
N/A |
VS |
|
 |
DOUBLE FIN SEAL (Dual Durometer)
This unequal leg seal was designed to be attached
to a vertical or horizontal edge. Its legs may be trimmed in the field
to fine tune the installation. To attach, use Crystal Clear 2-way tape
for a positive, long lasting bond.
Glass Thickness |
Product Code |
N/A |
DFS |
|
 |
“L” SEAL (Dual Durometer)
Use this clear “L” Seal between
the door and the wall on the hinge side or on the strike side of out-swing
doors only. Attach the rigid side to the wall. The soft leg provides
a cushioned, quiet closure. To attach, use Crystal Clear 2-way tape
for a positive, long lasting bond.
Glass Thickness |
Product Code |
N/A |
LS |
|
 |
“T” WIPE (Dual Durometer)
This seal was designed to be attached to a
vertical or horizontal edge. Its leg may be trimmed in the field to
fine tune the installation. To attach, use Crystal Clear
2-way tape for a positive, long lasting bond.
Glass Thickness |
Product Code |
N/A |
TW |
|
 |
BULB SEAL (Dual Durometer)
Use this clear Bulb Seal between the door
and the wall on the hinge side or on the strike side. Attach rigid
side to glass, soft bubble provides a watertight seal. Closes gaps
from 5/32” - 7/32”. To attach use Crystal Clear 2-way tape
for a positive, long lasting bond.
Glass Thickness |
Product Code |
N/A |
VBS |
|
 |
